#! /usr/bin/perl -w

use strict;
use POSIX;
use Fcntl;
use File::Temp 'tempfile';
use Getopt::Long qw(:config bundling);
use Fcntl qw(SEEK_SET SEEK_CUR);

# Read Pintos.pm from the same directory as this program.
BEGIN { my $self = $0; $self =~ s%/+[^/]*$%%; require "$self/Pintos.pm"; }

# Command-line options.
our ($start_time) = time ();
our ($sim);			# Simulator: bochs, qemu, or player.
our ($debug) = "none";		# Debugger: none, monitor, or gdb.
our ($mem) = 4;			# Physical RAM in MB.
our ($serial) = 1;		# Use serial port for input and output?
our ($vga);			# VGA output: window, terminal, or none.
our ($jitter);			# Seed for random timer interrupts, if set.
our ($realtime);		# Synchronize timer interrupts with real time?
our ($timeout);			# Maximum runtime in seconds, if set.
our ($kill_on_failure);		# Abort quickly on test failure?
our (@puts);			# Files to copy into the VM.
our (@gets);			# Files to copy out of the VM.
our ($as_ref);			# Reference to last addition to @gets or @puts.
our (@kernel_args);		# Arguments to pass to kernel.
our (%parts);			# Partitions.
our ($make_disk);		# Name of disk to create.
our ($tmp_disk) = 1;		# Delete $make_disk after run?
our (@disks);			# Extra disk images to pass to simulator.
our ($loader_fn);		# Bootstrap loader.
our (%geometry);		# IDE disk geometry.
our ($align);			# Partition alignment.

parse_command_line ();
prepare_scratch_disk ();
find_disks ();
run_vm ();
finish_scratch_disk ();

exit 0;

# Parses the command line.
sub parse_command_line {
    usage (0) if @ARGV == 0 || (@ARGV == 1 && $ARGV[0] eq '--help');

    @kernel_args = @ARGV;
    if (grep ($_ eq '--', @kernel_args)) {
	@ARGV = ();
	while ((my $arg = shift (@kernel_args)) ne '--') {
	    push (@ARGV, $arg);
	}
	GetOptions ("sim=s" => sub { set_sim ($_[1]) },
		    "bochs" => sub { set_sim ("bochs") },
		    "qemu" => sub { set_sim ("qemu") },
		    "player" => sub { set_sim ("player") },

		    "debug=s" => sub { set_debug ($_[1]) },
		    "no-debug" => sub { set_debug ("none") },
		    "monitor" => sub { set_debug ("monitor") },
		    "gdb" => sub { set_debug ("gdb") },

		    "m|memory=i" => \$mem,
		    "j|jitter=i" => sub { set_jitter ($_[1]) },
		    "r|realtime" => sub { set_realtime () },

		    "T|timeout=i" => \$timeout,
		    "k|kill-on-failure" => \$kill_on_failure,

		    "v|no-vga" => sub { set_vga ('none'); },
		    "s|no-serial" => sub { $serial = 0; },
		    "t|terminal" => sub { set_vga ('terminal'); },

		    "p|put-file=s" => sub { add_file (\@puts, $_[1]); },
		    "g|get-file=s" => sub { add_file (\@gets, $_[1]); },
		    "a|as=s" => sub { set_as ($_[1]); },

		    "h|help" => sub { usage (0); },

		    "kernel=s" => \&set_part,
		    "filesys=s" => \&set_part,
		    "swap=s" => \&set_part,

		    "filesys-size=s" => \&set_part,
		    "scratch-size=s" => \&set_part,
		    "swap-size=s" => \&set_part,

		    "kernel-from=s" => \&set_part,
		    "filesys-from=s" => \&set_part,
		    "swap-from=s" => \&set_part,

		    "make-disk=s" => sub { $make_disk = $_[1];
					   $tmp_disk = 0; },
		    "disk=s" => sub { set_disk ($_[1]); },
		    "loader=s" => \$loader_fn,

		    "geometry=s" => \&set_geometry,
		    "align=s" => \&set_align)
	  or exit 1;
    }

    $sim = "bochs" if !defined $sim;
    $debug = "none" if !defined $debug;
    $vga = exists ($ENV{DISPLAY}) ? "window" : "none" if !defined $vga;

    undef $timeout, print "warning: disabling timeout with --$debug\n"
      if defined ($timeout) && $debug ne 'none';

    print "warning: enabling serial port for -k or --kill-on-failure\n"
      if $kill_on_failure && !$serial;

    $align = "bochs",
      print STDERR "warning: setting --align=bochs for Bochs support\n"
	if $sim eq 'bochs' && defined ($align) && $align eq 'none';
}

# usage($exitcode).
# Prints a usage message and exits with $exitcode.
sub usage {
    my ($exitcode) = @_;
    $exitcode = 1 unless defined $exitcode;
    print <<'EOF';
pintos, a utility for running Pintos in a simulator
Usage: pintos [OPTION...] -- [ARGUMENT...]
where each OPTION is one of the following options
  and each ARGUMENT is passed to Pintos kernel verbatim.
Simulator selection:
  --bochs                  (default) Use Bochs as simulator
  --qemu                   Use QEMU as simulator
  --player                 Use VMware Player as simulator
Debugger selection:
  --no-debug               (default) No debugger
  --monitor                Debug with simulator's monitor
  --gdb                    Debug with gdb
Display options: (default is both VGA and serial)
  -v, --no-vga             No VGA display or keyboard
  -s, --no-serial          No serial input or output
  -t, --terminal           Display VGA in terminal (Bochs only)
Timing options: (Bochs only)
  -j SEED                  Randomize timer interrupts
  -r, --realtime           Use realistic, not reproducible, timings
Testing options:
  -T, --timeout=N          Kill Pintos after N seconds CPU time or N*load_avg
                           seconds wall-clock time (whichever comes first)
  -k, --kill-on-failure    Kill Pintos a few seconds after a kernel or user
                           panic, test failure, or triple fault
Configuration options:
  -m, --mem=N              Give Pintos N MB physical RAM (default: 4)
File system commands:
  -p, --put-file=HOSTFN    Copy HOSTFN into VM, by default under same name
  -g, --get-file=GUESTFN   Copy GUESTFN out of VM, by default under same name
  -a, --as=FILENAME        Specifies guest (for -p) or host (for -g) file name
Partition options: (where PARTITION is one of: kernel filesys scratch swap)
  --PARTITION=FILE         Use a copy of FILE for the given PARTITION
  --PARTITION-size=SIZE    Create an empty PARTITION of the given SIZE in MB
  --PARTITION-from=DISK    Use of a copy of the given PARTITION in DISK
  (There is no --kernel-size, --scratch, or --scratch-from option.)
Disk configuration options:
  --make-disk=DISK         Name the new DISK and don't delete it after the run
  --disk=DISK              Also use existing DISK (may be used multiple times)
Advanced disk configuration options:
  --loader=FILE            Use FILE as bootstrap loader (default: loader.bin)
  --geometry=H,S           Use H head, S sector geometry (default: 16,63)
  --geometry=zip           Use 64 head, 32 sector geometry for USB-ZIP boot
                           (see http://syslinux.zytor.com/usbkey.php)
  --align=bochs            Pad out disk to cylinder to support Bochs (default)
  --align=full             Align partition boundaries to cylinder boundary to
                           let fdisk guess correct geometry and quiet warnings
  --align=none             Don't align partitions at all, to save space
Other options:
  -h, --help               Display this help message.
EOF
    exit $exitcode;
}

# Sets the simulator.
sub set_sim {
    my ($new_sim) = @_;
    die "--$new_sim conflicts with --$sim\n"
	if defined ($sim) && $sim ne $new_sim;
    $sim = $new_sim;
}

# Sets the debugger.
sub set_debug {
    my ($new_debug) = @_;
    die "--$new_debug conflicts with --$debug\n"
	if $debug ne 'none' && $new_debug ne 'none' && $debug ne $new_debug;
    $debug = $new_debug;
}

# Sets VGA output destination.
sub set_vga {
    my ($new_vga) = @_;
    if (defined ($vga) && $vga ne $new_vga) {
	print "warning: conflicting vga display options\n";
    }
    $vga = $new_vga;
}

# Sets randomized timer interrupts.
sub set_jitter {
    my ($new_jitter) = @_;
    die "--realtime conflicts with --jitter\n" if defined $realtime;
    die "different --jitter already defined\n"
	if defined $jitter && $jitter != $new_jitter;
    $jitter = $new_jitter;
}

# Sets real-time timer interrupts.
sub set_realtime {
    die "--realtime conflicts with --jitter\n" if defined $jitter;
    $realtime = 1;
}

# add_file(\@list, $file)
#
# Adds [$file] to @list, which should be @puts or @gets.
# Sets $as_ref to point to the added element.
sub add_file {
    my ($list, $file) = @_;
    $as_ref = [$file];
    push (@$list, $as_ref);
}

# Sets the guest/host name for the previous put/get.
sub set_as {
    my ($as) = @_;
    die "-a (or --as) is only allowed after -p or -g\n" if !defined $as_ref;
    die "Only one -a (or --as) is allowed after -p or -g\n"
      if defined $as_ref->[1];
    $as_ref->[1] = $as;
}

# Sets $disk as a disk to be included in the VM to run.
sub set_disk {
    my ($disk) = @_;

    push (@disks, $disk);

    my (%pt) = read_partition_table ($disk);
    for my $role (keys %pt) {
	die "can't have two sources for \L$role\E partition"
	  if exists $parts{$role};
	$parts{$role}{DISK} = $disk;
	$parts{$role}{START} = $pt{$role}{START};
	$parts{$role}{SECTORS} = $pt{$role}{SECTORS};
    }
}

# Locates the files used to back each of the virtual disks,
# and creates temporary disks.
sub find_disks {
    # Find kernel, if we don't already have one.
    if (!exists $parts{KERNEL}) {
	my $name = find_file ('kernel.bin');
	die "Cannot find kernel\n" if !defined $name;
	do_set_part ('KERNEL', 'file', $name);
    }

    # Try to find file system and swap disks, if we don't already have
    # partitions.
    if (!exists $parts{FILESYS}) {
	my $name = find_file ('filesys.dsk');
	set_disk ($name) if defined $name;
    }
    if (!exists $parts{SWAP}) {
	my $name = find_file ('swap.dsk');
	set_disk ($name) if defined $name;
    }

    # Warn about (potentially) missing partitions.
    if (my ($project) = `pwd` =~ /\b(threads|userprog|vm|filesys)\b/) {
	if ((grep ($project eq $_, qw (userprog vm filesys)))
	    && !defined $parts{FILESYS}) {
	    print STDERR "warning: it looks like you're running the $project ";
	    print STDERR "project, but no file system partition is present\n";
	}
	if ($project eq 'vm' && !defined $parts{SWAP}) {
	    print STDERR "warning: it looks like you're running the $project ";
	    print STDERR "project, but no swap partition is present\n";
	}
    }

    # Open disk handle.
    my ($handle);
    if (!defined $make_disk) {
	($handle, $make_disk) = tempfile (UNLINK => $tmp_disk,
					  SUFFIX => '.dsk');
    } else {
	die "$make_disk: already exists\n" if -e $make_disk;
	open ($handle, '>', $make_disk) or die "$make_disk: create: $!\n";
    }

    # Prepare the arguments to pass to the Pintos kernel.
    my (@args);
    push (@args, shift (@kernel_args))
      while @kernel_args && $kernel_args[0] =~ /^-/;
    push (@args, 'extract') if @puts;
    push (@args, @kernel_args);
    push (@args, 'append', $_->[0]) foreach @gets;

    # Make disk.
    my (%disk);
    our (@role_order);
    for my $role (@role_order) {
	my $p = $parts{$role};
	next if !defined $p;
	next if exists $p->{DISK};
	$disk{$role} = $p;
    }
    $disk{DISK} = $make_disk;
    $disk{HANDLE} = $handle;
    $disk{ALIGN} = $align;
    $disk{GEOMETRY} = %geometry;
    $disk{FORMAT} = 'partitioned';
    $disk{LOADER} = read_loader ($loader_fn);
    $disk{ARGS} = \@args;
    assemble_disk (%disk);

    # Put the disk at the front of the list of disks.
    unshift (@disks, $make_disk);
    die "can't use more than " . scalar (@disks) . "disks\n" if @disks > 4;
}

# Prepare the scratch disk for gets and puts.
sub prepare_scratch_disk {
    return if !@gets && !@puts;

    my ($p) = $parts{SCRATCH};
    # Create temporary partition and write the files to put to it,
    # then write an end-of-archive marker.
    my ($part_handle, $part_fn) = tempfile (UNLINK => 1, SUFFIX => '.part');
    put_scratch_file ($_->[0], defined $_->[1] ? $_->[1] : $_->[0],
		      $part_handle, $part_fn)
      foreach @puts;
    write_fully ($part_handle, $part_fn, "\0" x 1024);

    # Make sure the scratch disk is big enough to get big files
    # and at least as big as any requested size.
    my ($size) = round_up (max (@gets * 1024 * 1024, $p->{BYTES} || 0), 512);
    extend_file ($part_handle, $part_fn, $size);
    close ($part_handle);

    if (exists $p->{DISK}) {
	# Copy the scratch partition to the disk.
	die "$p->{DISK}: scratch partition too small\n"
	  if $p->{SECTORS} * 512 < $size;

	my ($disk_handle);
	open ($part_handle, '<', $part_fn) or die "$part_fn: open: $!\n";
	open ($disk_handle, '+<', $p->{DISK}) or die "$p->{DISK}: open: $!\n";
	my ($start) = $p->{START} * 512;
	sysseek ($disk_handle, $start, SEEK_SET) == $start
	  or die "$p->{DISK}: seek: $!\n";
	copy_file ($part_handle, $part_fn, $disk_handle, $p->{DISK}, $size);
	close ($disk_handle) or die "$p->{DISK}: close: $!\n";
	close ($part_handle) or die "$part_fn: close: $!\n";
    } else {
	# Set $part_fn as the source for the scratch partition.
	do_set_part ('SCRATCH', 'file', $part_fn);
    }
}

# Read "get" files from the scratch disk.
sub finish_scratch_disk {
    return if !@gets;

    # Open scratch partition.
    my ($p) = $parts{SCRATCH};
    my ($part_handle);
    my ($part_fn) = $p->{DISK};
    open ($part_handle, '<', $part_fn) or die "$part_fn: open: $!\n";
    sysseek ($part_handle, $p->{START} * 512, SEEK_SET) == $p->{START} * 512
      or die "$part_fn: seek: $!\n";

    # Read each file.
    # If reading fails, delete that file and all subsequent files, but
    # don't die with an error, because that's a guest error not a host
    # error.  (If we do exit with an error code, it fouls up the
    # grading process.)  Instead, just make sure that the host file(s)
    # we were supposed to retrieve is unlinked.
    my ($ok) = 1;
    my ($part_end) = ($p->{START} + $p->{SECTORS}) * 512;
    foreach my $get (@gets) {
	my ($name) = defined ($get->[1]) ? $get->[1] : $get->[0];
	if ($ok) {
	    my ($error) = get_scratch_file ($name, $part_handle, $part_fn);
	    if (!$error && sysseek ($part_handle, 0, SEEK_CUR) > $part_end) {
		$error = "$part_fn: scratch data overflows partition";
	    }
	    if ($error) {
		print STDERR "getting $name failed ($error)\n";
		$ok = 0;
	    }
	}
	die "$name: unlink: $!\n" if !$ok && !unlink ($name) && !$!{ENOENT};
    }
}

# mk_ustar_field($number, $size)
#
# Returns $number in a $size-byte numeric field in the format used by
# the standard ustar archive header.
sub mk_ustar_field {
    my ($number, $size) = @_;
    my ($len) = $size - 1;
    my ($out) = sprintf ("%0${len}o", $number) . "\0";
    die "$number: too large for $size-byte octal ustar field\n"
      if length ($out) != $size;
    return $out;
}

# calc_ustar_chksum($s)
#
# Calculates and returns the ustar checksum of 512-byte ustar archive
# header $s.
sub calc_ustar_chksum {
    my ($s) = @_;
    die if length ($s) != 512;
    substr ($s, 148, 8, ' ' x 8);
    return unpack ("%32a*", $s);
}

# put_scratch_file($src_file_name, $dst_file_name,
#                  $disk_handle, $disk_file_name).
#
# Copies $src_file_name into $disk_handle for extraction as
# $dst_file_name.  $disk_file_name is used for error messages.
sub put_scratch_file {
    my ($src_file_name, $dst_file_name, $disk_handle, $disk_file_name) = @_;

    print "Copying $src_file_name to scratch partition...\n";

    # ustar format supports up to 100 characters for a file name, and
    # even longer names given some common properties, but our code in
    # the Pintos kernel only supports at most 99 characters.
    die "$dst_file_name: name too long (max 99 characters)\n"
      if length ($dst_file_name) > 99;

    # Compose and write ustar header.
    stat $src_file_name or die "$src_file_name: stat: $!\n";
    my ($size) = -s _;
    my ($header) = (pack ("a100", $dst_file_name)	# name
		    . mk_ustar_field (0644, 8)		# mode
		    . mk_ustar_field (0, 8)		# uid
		    . mk_ustar_field (0, 8)		# gid
		    . mk_ustar_field ($size, 12)	# size
		    . mk_ustar_field (1136102400, 12)	# mtime
		    . (' ' x 8)				# chksum
		    . '0'				# typeflag
		    . ("\0" x 100)			# linkname
		    . "ustar\0"				# magic
		    . "00"				# version
		    . "root" . ("\0" x 28)		# uname
		    . "root" . ("\0" x 28)		# gname
		    . "\0" x 8				# devmajor
		    . "\0" x 8				# devminor
		    . ("\0" x 155))			# prefix
                    . "\0" x 12;			# pad to 512 bytes
    substr ($header, 148, 8) = mk_ustar_field (calc_ustar_chksum ($header), 8);
    write_fully ($disk_handle, $disk_file_name, $header);

    # Copy file data.
    my ($put_handle);
    sysopen ($put_handle, $src_file_name, O_RDONLY)
      or die "$src_file_name: open: $!\n";
    copy_file ($put_handle, $src_file_name, $disk_handle, $disk_file_name,
	       $size);
    die "$src_file_name: changed size while being read\n"
      if $size != -s $put_handle;
    close ($put_handle);

    # Round up disk data to beginning of next sector.
    write_fully ($disk_handle, $disk_file_name, "\0" x (512 - $size % 512))
      if $size % 512;
}

# get_scratch_file($get_file_name, $disk_handle, $disk_file_name)
#
# Copies from $disk_handle to $get_file_name (which is created).
# $disk_file_name is used for error messages.
# Returns 1 if successful, 0 on failure.
sub get_scratch_file {
    my ($get_file_name, $disk_handle, $disk_file_name) = @_;

    print "Copying $get_file_name out of $disk_file_name...\n";

    # Read ustar header sector.
    my ($header) = read_fully ($disk_handle, $disk_file_name, 512);
    return "scratch disk tar archive ends unexpectedly"
      if $header eq ("\0" x 512);

    # Verify magic numbers.
    return "corrupt ustar signature" if substr ($header, 257, 6) ne "ustar\0";
    return "invalid ustar version" if substr ($header, 263, 2) ne '00';

    # Verify checksum.
    my ($chksum) = oct (unpack ("Z*", substr ($header, 148, 8)));
    my ($correct_chksum) = calc_ustar_chksum ($header);
    return "checksum mismatch" if $chksum != $correct_chksum;

    # Get type.
    my ($typeflag) = substr ($header, 156, 1);
    return "not a regular file" if $typeflag ne '0' && $typeflag ne "\0";

    # Get size.
    my ($size) = oct (unpack ("Z*", substr ($header, 124, 12)));
    return "bad size $size\n" if $size < 0;

    # Copy file data.
    my ($get_handle);
    sysopen ($get_handle, $get_file_name, O_WRONLY | O_CREAT, 0666)
      or die "$get_file_name: create: $!\n";
    copy_file ($disk_handle, $disk_file_name, $get_handle, $get_file_name,
	       $size);
    close ($get_handle);

    # Skip forward in disk up to beginning of next sector.
    read_fully ($disk_handle, $disk_file_name, 512 - $size % 512)
      if $size % 512;

    return 0;
}

# Running simulators.

# Runs the selected simulator.
sub run_vm {
    if ($sim eq 'bochs') {
	run_bochs ();
    } elsif ($sim eq 'qemu') {
	run_qemu ();
    } elsif ($sim eq 'player') {
	run_player ();
    } else {
	die "unknown simulator `$sim'\n";
    }
}

# Runs Bochs.
sub run_bochs {
    # Select Bochs binary based on the chosen debugger.
    my ($bin) = $debug eq 'monitor' ? 'bochs-dbg' : 'bochs';

    my ($squish_pty);
    if ($serial) {
	$squish_pty = find_in_path ("squish-pty");
	print "warning: can't find squish-pty, so terminal input will fail\n"
	  if !defined $squish_pty;
    }

    # Write bochsrc.txt configuration file.
    open (BOCHSRC, ">", "bochsrc.txt") or die "bochsrc.txt: create: $!\n";
    print BOCHSRC <<EOF;
romimage: file=\$BXSHARE/BIOS-bochs-latest
vgaromimage: file=\$BXSHARE/VGABIOS-lgpl-latest
boot: disk
cpu: ips=1000000
megs: $mem
log: bochsout.txt
panic: action=fatal
user_shortcut: keys=ctrlaltdel
EOF
    print BOCHSRC "gdbstub: enabled=1\n" if $debug eq 'gdb';
    print BOCHSRC "clock: sync=", $realtime ? 'realtime' : 'none',
      ", time0=0\n";
    print BOCHSRC "ata1: enabled=1, ioaddr1=0x170, ioaddr2=0x370, irq=15\n"
      if @disks > 2;
    print_bochs_disk_line ("ata0-master", $disks[0]);
    print_bochs_disk_line ("ata0-slave", $disks[1]);
    print_bochs_disk_line ("ata1-master", $disks[2]);
    print_bochs_disk_line ("ata1-slave", $disks[3]);
    if ($vga ne 'terminal') {
	if ($serial) {
	    my $mode = defined ($squish_pty) ? "term" : "file";
	    print BOCHSRC "com1: enabled=1, mode=$mode, dev=/dev/stdout\n";
	}
	print BOCHSRC "display_library: nogui\n" if $vga eq 'none';
    } else {
	print BOCHSRC "display_library: term\n";
    }
    close (BOCHSRC);

    # Compose Bochs command line.
    my (@cmd) = ($bin, '-q');
    unshift (@cmd, $squish_pty) if defined $squish_pty;
    push (@cmd, '-j', $jitter) if defined $jitter;

    # Run Bochs.
    print join (' ', @cmd), "\n";
    my ($exit) = xsystem (@cmd);
    if (WIFEXITED ($exit)) {
	# Bochs exited normally.
	# Ignore the exit code; Bochs normally exits with status 1,
	# which is weird.
    } elsif (WIFSIGNALED ($exit)) {
	die "Bochs died with signal ", WTERMSIG ($exit), "\n";
    } else {
	die "Bochs died: code $exit\n";
    }
}

sub print_bochs_disk_line {
    my ($device, $disk) = @_;
    if (defined $disk) {
	my (%geom) = disk_geometry ($disk);
	print BOCHSRC "$device: type=disk, path=$disk, mode=flat, ";
	print BOCHSRC "cylinders=$geom{C}, heads=$geom{H}, spt=$geom{S}, ";
	print BOCHSRC "translation=none\n";
    }
}

# Runs QEMU.
sub run_qemu {
    print "warning: qemu doesn't support --terminal\n"
      if $vga eq 'terminal';
    print "warning: qemu doesn't support jitter\n"
      if defined $jitter;
    my (@cmd) = ('qemu-system-i386');
    push (@cmd, '-device', 'isa-debug-exit');

    push (@cmd, '-hda', $disks[0]) if defined $disks[0];
    push (@cmd, '-hdb', $disks[1]) if defined $disks[1];
    push (@cmd, '-hdc', $disks[2]) if defined $disks[2];
    push (@cmd, '-hdd', $disks[3]) if defined $disks[3];
    push (@cmd, '-m', $mem);
    push (@cmd, '-net', 'none');
    push (@cmd, '-nographic') if $vga eq 'none';
    push (@cmd, '-serial', 'stdio') if $serial && $vga ne 'none';
    push (@cmd, '-S') if $debug eq 'monitor';
    push (@cmd, '-s', '-S') if $debug eq 'gdb';
    push (@cmd, '-monitor', 'null') if $vga eq 'none' && $debug eq 'none';
    run_command (@cmd);
}

# player_unsup($flag)
#
# Prints a message that $flag is unsupported by VMware Player.
sub player_unsup {
    my ($flag) = @_;
    print "warning: no support for $flag with VMware Player\n";
}

# Runs VMware Player.
sub run_player {
    player_unsup ("--$debug") if $debug ne 'none';
    player_unsup ("--no-vga") if $vga eq 'none';
    player_unsup ("--terminal") if $vga eq 'terminal';
    player_unsup ("--jitter") if defined $jitter;
    player_unsup ("--timeout"), undef $timeout if defined $timeout;
    player_unsup ("--kill-on-failure"), undef $kill_on_failure
      if defined $kill_on_failure;

    $mem = round_up ($mem, 4);	# Memory must be multiple of 4 MB.

    open (VMX, ">", "pintos.vmx") or die "pintos.vmx: create: $!\n";
    chmod 0777 & ~umask, "pintos.vmx";
    print VMX <<EOF;
#! /usr/bin/vmware -G
config.version = 8
guestOS = "linux"
memsize = $mem
floppy0.present = FALSE
usb.present = FALSE
sound.present = FALSE
gui.exitAtPowerOff = TRUE
gui.exitOnCLIHLT = TRUE
gui.powerOnAtStartUp = TRUE
EOF

    print VMX <<EOF if $serial;
serial0.present = TRUE
serial0.fileType = "pipe"
serial0.fileName = "pintos.socket"
serial0.pipe.endPoint = "client"
serial0.tryNoRxLoss = "TRUE"
EOF

    for (my ($i) = 0; $i < 4; $i++) {
	my ($dsk) = $disks[$i];
	last if !defined $dsk;

	my ($device) = "ide" . int ($i / 2) . ":" . ($i % 2);
	my ($pln) = "$device.pln";
	print VMX <<EOF;

$device.present = TRUE
$device.deviceType = "plainDisk"
$device.fileName = "$pln"
EOF

	open (URANDOM, '<', '/dev/urandom') or die "/dev/urandom: open: $!\n";
	my ($bytes);
	sysread (URANDOM, $bytes, 4) == 4 or die "/dev/urandom: read: $!\n";
	close (URANDOM);
	my ($cid) = unpack ("L", $bytes);

	my (%geom) = disk_geometry ($dsk);
	open (PLN, ">", $pln) or die "$pln: create: $!\n";
	print PLN <<EOF;
version=1
CID=$cid
parentCID=ffffffff
createType="monolithicFlat"

RW $geom{CAPACITY} FLAT "$dsk" 0

# The Disk Data Base
#DDB

ddb.adapterType = "ide"
ddb.virtualHWVersion = "4"
ddb.toolsVersion = "2"
ddb.geometry.cylinders = "$geom{C}"
ddb.geometry.heads = "$geom{H}"
ddb.geometry.sectors = "$geom{S}"
EOF
	close (PLN);
    }
    close (VMX);

    my ($squish_unix);
    if ($serial) {
	$squish_unix = find_in_path ("squish-unix");
	print "warning: can't find squish-unix, so terminal input ",
	  "and output will fail\n" if !defined $squish_unix;
    }

    my ($vmx) = getcwd () . "/pintos.vmx";
    my (@cmd) = ("vmplayer", $vmx);
    unshift (@cmd, $squish_unix, "pintos.socket") if $squish_unix;
    print join (' ', @cmd), "\n";
    xsystem (@cmd);
}

# Disk utilities.

sub extend_file {
    my ($handle, $file_name, $size) = @_;
    if (-s ($handle) < $size) {
	sysseek ($handle, $size - 1, 0) == $size - 1
	  or die "$file_name: seek: $!\n";
	syswrite ($handle, "\0") == 1
	  or die "$file_name: write: $!\n";
    }
}

# disk_geometry($file)
#
# Examines $file and returns a valid IDE disk geometry for it, as a
# hash.
sub disk_geometry {
    my ($file) = @_;
    my ($size) = -s $file;
    die "$file: stat: $!\n" if !defined $size;
    die "$file: size $size not a multiple of 512 bytes\n" if $size % 512;
    my ($cyl_size) = 512 * 16 * 63;
    my ($cylinders) = ceil ($size / $cyl_size);

    return (CAPACITY => $size / 512,
	    C => $cylinders,
	    H => 16,
	    S => 63);
}

# Subprocess utilities.

# run_command(@args)
#
# Runs xsystem(@args).
# Also prints the command it's running and checks that it succeeded.
sub run_command {
    print join (' ', @_), "\n";
    die "command failed\n" if xsystem (@_);
}

# xsystem(@args)
#
# Creates a subprocess via exec(@args) and waits for it to complete.
# Relays common signals to the subprocess.
# If $timeout is set then the subprocess will be killed after that long.
sub xsystem {
    # QEMU turns off local echo and does not restore it if killed by a signal.
    # We compensate by restoring it ourselves.
    my $cleanup = sub {};
    if (isatty (0)) {
	my $termios = POSIX::Termios->new;
	$termios->getattr (0);
	$cleanup = sub { $termios->setattr (0, &POSIX::TCSANOW); }
    }

    # Create pipe for filtering output.
    pipe (my $in, my $out) or die "pipe: $!\n" if $kill_on_failure;

    my ($pid) = fork;
    if (!defined ($pid)) {
	# Fork failed.
	die "fork: $!\n";
    } elsif (!$pid) {
	# Running in child process.
	dup2 (fileno ($out), STDOUT_FILENO) or die "dup2: $!\n"
	  if $kill_on_failure;
	exec_setitimer (@_);
    } else {
	# Running in parent process.
	close $out if $kill_on_failure;

	my ($cause);
	local $SIG{ALRM} = sub { timeout ($pid, $cause, $cleanup); };
	local $SIG{INT} = sub { relay_signal ($pid, "INT", $cleanup); };
	local $SIG{TERM} = sub { relay_signal ($pid, "TERM", $cleanup); };
	alarm ($timeout * get_load_average () + 1) if defined ($timeout);

	if ($kill_on_failure) {
	    # Filter output.
	    my ($buf) = "";
	    my ($boots) = 0;
	    local ($|) = 1;
	    for (;;) {
		if (waitpid ($pid, WNOHANG) != 0) {
		    # Subprocess died.  Pass through any remaining data.
		    do { print $buf } while sysread ($in, $buf, 4096) > 0;
		    last;
		}

		# Read and print out pipe data.
		my ($len) = length ($buf);
		my ($n_read) = sysread ($in, $buf, 4096, $len);
		waitpid ($pid, 0), last if !defined ($n_read) || $n_read <= 0;
		print substr ($buf, $len);

		# Remove full lines from $buf and scan them for keywords.
		while ((my $idx = index ($buf, "\n")) >= 0) {
		    local $_ = substr ($buf, 0, $idx + 1, '');
		    next if defined ($cause);
		    if (/(Kernel PANIC|User process ABORT)/ ) {
			$cause = "\L$1\E";
			alarm (5);
		    } elsif (/Pintos booting/ && ++$boots > 1) {
			$cause = "triple fault";
			alarm (5);
		    } elsif (/FAILED/) {
			$cause = "test failure";
			alarm (5);
		    }
		}
	    }
	} else {
	    waitpid ($pid, 0);
	}
	alarm (0);
	&$cleanup ();

	if (WIFSIGNALED ($?) && WTERMSIG ($?) == SIGVTALRM_number ()) {
	    seek (STDOUT, 0, 2);
	    print "\nTIMEOUT after $timeout seconds of host CPU time\n";
	    exit 0;
	}

        # Kind of a gross hack, because qemu's isa-debug-exit device
        # only allows odd-numbered exit values, so we can't exit
        # cleanly with 0.  We use exit status 0x63 as an alternate
        # "clean" exit status.
	return ($? != 0x6300) && $?;
    }
}

# relay_signal($pid, $signal, &$cleanup)
#
# Relays $signal to $pid and then reinvokes it for us with the default
# handler.  Also cleans up temporary files and invokes $cleanup.
sub relay_signal {
    my ($pid, $signal, $cleanup) = @_;
    kill $signal, $pid;
    eval { File::Temp::cleanup() };	# Not defined in old File::Temp.
    &$cleanup ();
    $SIG{$signal} = 'DEFAULT';
    kill $signal, getpid ();
}

# timeout($pid, $cause, &$cleanup)
#
# Interrupts $pid and dies with a timeout error message,
# after invoking $cleanup.
sub timeout {
    my ($pid, $cause, $cleanup) = @_;
    kill "INT", $pid;
    waitpid ($pid, 0);
    &$cleanup ();
    seek (STDOUT, 0, 2);
    if (!defined ($cause)) {
	my ($load_avg) = `uptime` =~ /(load average:.*)$/i;
	print "\nTIMEOUT after ", time () - $start_time,
	  " seconds of wall-clock time";
	print  " - $load_avg" if defined $load_avg;
	print "\n";
    } else {
	print "Simulation terminated due to $cause.\n";
    }
    exit 0;
}

# Returns the system load average over the last minute.
# If the load average is less than 1.0 or cannot be determined, returns 1.0.
sub get_load_average {
    my ($avg) = `uptime` =~ /load average:\s*([^,]+),/;
    return $avg >= 1.0 ? $avg : 1.0;
}

# Calls setitimer to set a timeout, then execs what was passed to us.
sub exec_setitimer {
    if (defined $timeout) {
	if ($^V ge 5.8.0) {
	    eval "
              use Time::HiRes qw(setitimer ITIMER_VIRTUAL);
              setitimer (ITIMER_VIRTUAL, $timeout, 0);
            ";
	} else {
	    { exec ("setitimer-helper", $timeout, @_); };
	    exit 1 if !$!{ENOENT};
	    print STDERR "warning: setitimer-helper is not installed, so ",
	      "CPU time limit will not be enforced\n";
	}
    }
    exec (@_);
    exit (1);
}

sub SIGVTALRM_number {
    use Config;
    my $i = 0;
    foreach my $name (split(' ', $Config{sig_name})) {
	return $i if $name eq 'VTALRM';
	$i++;
    }
    return 0;
}

# find_in_path ($program)
#
# Searches for $program in $ENV{PATH}.
# Returns $program if found, otherwise undef.
sub find_in_path {
    my ($program) = @_;
    -x "$_/$program" and return $program foreach split (':', $ENV{PATH});
    return;
}
